1. Using the toggle switch manufacturers of products with caution chemicals Torsion switch manufacturers use the product floor, such as polycarbonate and other synthetic resin, so should avoid the potentiometer exposure to ammonia, amines, alkaline solution, the Soviet Union hydrocarbon, ketone, ester, halocarbons and other chemicals in the strong atmosphere. 2. Be careful with flux Solder should avoid the use of water-soluble flux, otherwise it will constitute the toggle switch of metal and other materials have a negative impact. 3. Solder Wiring design and soldering methods should be avoided, melting tin flow to the PC board plane, this will cause poor contact. 4. Low temperature work Toggle switch manufacturers products are used for low-temperature environment, such as the frigid car radio or car audio, the Company according to customer requirements to provide comfortable feel products, please specify when ordering. 5. Slide length The shorter the length the better (at least 5mm) in the case of the width of the handle A unchanged, the shorter handle length, feel better, the other the higher the power point, feel worse. 6. Drive arm Do not allow the operating point away from the center line of the slider, for the same reason, the shorter the better the distance B.